Colour

Certification

Collections

Flame resistant collection

Function

Lining

Material

Type of garment

Gender

Laundry

Size

Automatskapas utefter position 13+ i ett artikelnummer

NEW!

Polyuretan coated (PU) polyester, wind- and waterproof fabric

A knitted material with inherent flame resistant features. It's an interlock that is soft and comfortable to wear. The fabric is certified for EN ISO 20471, EN ISO 11612, EN 1149-3, EN 61482-1-2, EN 61482-1-1.

Lighter weight fabric which protects you from dirt and splashes, but also offer full freedom of movement. Excellent for both engineering and service industries. Colour fast and good shape retention.

This strap is designed for the Blåkläder ToolRig™ system and lets you position a standard hammer holder exactly where you want it. Attach the holder, clip it onto the rail – done. The hook-and-loop fastening makes mounting quick, simple and flexible, with no belt needed.

ToolRig™ Hammer Holder Strap

A robust, adjustable hammer holder that makes work smoother. It connects quickly via the Blåkläder ToolRig™ system and gives you a stable, easy-to-reach place for your hammer. The loop size adjusts so you can balance retention and quick access. 
The holder pivots 45° in either direction, making insertion and draw easier and keeping it comfortable for both right- and left-handed users. The 10 cm loop holds the hammer securely even in motion, without swing. At the smallest loop setting it also works a treat for stowing a try square.

ToolRig™ Hammer Holder

Give your favourite pockets a second life – and a place on the rail. This is the same buckle used on Blåkläder ToolRig™ accessories such as tool pockets and hammer holders. Fit it to existing tools or accessories to make them compatible with the ToolRig™ rail on our trousers. 
Ideal for upgrading or replacing a buckle that has given up after hard use. For a complete set-up, combine with a Slider (art. 2535 or 2536). Screws for installation are included.

ToolRig™ Buckle

Make your kit as mobile as you are. This slider with holder mounts to the ToolRig™ rail that runs 360° around the waist on our trousers and tool belts. Move pockets and accessories to where the job demands, front, side or back – in seconds. 
Perfect for switching tasks without taking your gear off. Sold as a 2-pack and also available in a lockable version (art. 2536) if you want to fix the pocket’s position.

ToolRig™ Slider 2-Pack

This slider with holder mounts to the ToolRig™ rail that runs 360° around the waist on our trousers and tool belts. Shift pockets and accessories to the front, side or back in seconds, ideal when you move between tasks without removing your rig. 
This lockable model lets you fix the pocket’s position. Works perfectly alongside the non-lockable model (art. 2535).

ToolRig™ Slider Lockable

Build order where you need it. This panel is designed for fixed mounting on a wall or other flat surfaces and becomes a stable base for your ToolRig™ accessories. It holds four mounts and is 18 cm long, ideal for one ToolRig™ tool pocket or several hammer holders in a row. Screw it up, hang your kit and get on with the job. Need more capacity? Add additional panels side by side and extend as far as you like. 
Wood screws for wall mounting are included, and bolts and nuts are provided for metal surfaces. You choose the surface – the panel brings the order.

ToolRig™ Wall Mount

Smarter storage, with more freedom to move. This panel is built for T-track and gives you a fast base to mount ToolRig™ accessories wherever you want them – in a cabinet, on a workshop wall or on a bench. The T-track system lets mounts slide along the rail. 
The panel holds four mounts and is 18 cm long, ideal for one ToolRig™ tool pocket or several hammer holders in a row. Two T-nuts with matching bolts are included for mounting to the T-track. Need more capacity? Install multiple panels side by side along the rail.

ToolRig™ T-Track Mount

Chaps in Hi-Vis for you with work assignments that require a lightweight and smooth rainwear. It is wind and waterproof and has welded seams and has a hook, which can be attached to a belt or a trouser strap. 
Certified according to EN 343, Protective clothing against bad weather and EN 471 / EN ISO 20471, Class 2, Protective clothing with high visibility.

Chaps Hi-Vis LEVEL 1

Neck protection with inherent flame retardant in sweatshirt quality. Due to the high demand, Blåkläder has developed this neckline because its double layers at one end protects the neck and face particularly well. 
Can be used both as a hat or neck cover and can be pulled up as a face protection when needed. 
The garment is certified according to EN 14116 index 3, EN 1149-5 and the material has an ELIM-value of 8,6 cal/cm².

Inherent Neck protection

Detachable ID card pocket for flame resistant clothing.

Flame resistant ID-card pocket

Detachable ID-pocket with button closing.

ID-pocket

A smart and functional hammer holder in plastic, with a Velcro fastener to attach to your belt. It can also be attached directly to the openable straps on the trousers. A perfect accessory for all professional craftsmen. 

Hammer holder plastic

Soft and scratch-free hammer holder. The removable hammer holder fits all Blåkläder's trousers that can accommodate this. As the hammer holder is soft, you don't need to remove it when you sit in the car, which is otherwise a common problem. Sold separately.

Hammer holder

A holder featuring a smart and functional "Multi-adapter plate" that's compatible with trousers that has Blåkläder's new click button fastening system. The adapter also includes a loop for the belt. The perfect accessory for all professional craftsmen. 
Suitable for hammer holder 2112, 4020 and 2113.

Adapter for Hammer Holder

Fastens with a carabiner on garments equipped with a D-ring.

Other